RatRig VCore 3.1 V2 IDEX Electronics Panels Hardware - Adapter: 370mm x 370mm

- Adapter: 370mm x 370mm x 11mm (with the pin mounts installed)

The depth of the magnet pockets can vary a tiny bit due to variances in the thickness of the magnets and the flatness of the sheet

We have been using this probe exclusively for several years

The proper way to install the bed is to tighten 1 screw fully

with filament wound in a cardboard spool

RatRig VCore 3.1 V2 IDEX Electronics Panels Hardware - Adapter: 370mm x 370mmNow available are the IDEX Electronics Panel for the RatRig VCore3. 1 line of printer! This listing is for just the IDEX Electronics panel for v3. 1 of the V Core3 printer. The Black ABS is textured on one side, and smooth on the other side. The Textured side is orientated to go toward the inside of the printer, with the shiny side being towards the electronics bay. The shiny side WILL have marks and scratches from the manufacturing process on it.