076: HS-200-HV (Shipment 15th of August 2026) 1x PDB with soldered-on input

1x PDB with soldered-on input wires (2x 20cm 8AWG)

if you need a different output voltage on output 2  -> Output 1 can't be changed and must remain 5

If the difference in current is larger than +/- 15%

35V dropout voltage)

1 (The Cube) and any other flight controller via an adapter cable

076: HS-200-HV (Shipment 15th of August 2026) 1x PDB with soldered-on input200A Current measurement sensor board, based on Allegro Hall Sensor ACS 250U. The voltage reading of the LiPo is optimized for up to 14S LiPo packs. This Sensor board needs a power supply. So please select the matching BEC according to your preference from the BEC section. The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry etc. Connected to the sensor are 2x10cm AWG10 wire (red) as a standard. The board